| Battery Lifespan | 1.5 h |
| Battery | 6,4V 6AH LiFePO4 Vdc |
| Loading Time | 24 h |
| Input Voltage | 198-265 Vac |
| Output Power | 15 W |
| Output Voltage | 10-400 Vdc |
| Operating Temperature | 0~50 °F |
| Driver | Isolated |
| Material | Metal |
| Casing Color | White |
| Installment | Surface |
| IP Protection Grade | IP33 |
| Use | Indoor / Outdoor |
| Length | 18.2 in |
| Width | 3.54 in |
| Height | 4.9 in |
| Weight | 18,34 oz |
This 110-220V emergency battery for LED lamps and tubes can be used in both normal and emergency conditions. If the main power supply fails, the backup battery will detect it and switch itself to emergency mode, supplying power to the LED or Tube luminaires and operating for up to 90 minutes. It has comprehensive short circuit, overload, and over voltage protection. There is no spark when plugged in, it does not get too hot, so you do not need to worry about fires, explosions, shocks or damage that could reach children or yourself.
The unit contains a battery, charger and converter circuit in a single can, and is available in different mounting configurations for individual fixing requirements. When power is restored, the battery will return to standby mode, again recharging the batteries until the next failure. Recharge time is 24 hours
Warnings:
■ Do not use the product for purposes other than its intended use.
■ Product installation must be carried out by qualified personnel.
■ Remove power before installing.
Related products
