NILA

Adjustable Step-down XL4015 Module, 1.25-36V 75Wmax 5Amax, DC-DC

    Unit price

    • $1.04
    For Wholesale prices, please contact us: +34 629.208.726 from Monday to Friday, from 9:00am to 5:00pm (GMT+1) or through jorge@aspentrade.com
* Prices do not include TAX. ** All prices updated to 18/07/24.
Output Power 75 W
Output Current 5 A
Output Voltage 1.25-36 Vdc
Input Voltage 4-38 Vdc
Frequency 180000 Hz
Adjustable? Yes   
Operating Temperature -40 ~ 185 °F
Length 2.13 in
Width 0,91 in
Height 0.59 in

Our new buck module also known as “step-down module” is a DC-to-DC power converter that lowers the voltage while decreasing down the current from its input (power supply) to its output (load capacity). 

step-down modules are used in many instances from power supplies where lower voltages may be needed to achieve low power requirements.

 

Highlights:

enlightened Adjustable Voltage: Our buck converter can be used with the common input DC voltages of 5V, 9V, 12V, 15V, 18V, 24V and can easily adjust to a DC output voltage between 1.25 to 36V. We highly recommend to always adjust the input voltage at least 2 values higher than the needed output voltage.

enlightened Lower Power Consumption: It's maximum output current is 75W, please ensure to install an additional cooling system or heatsink if 50W or more are needed.

enlightened Lower Current Consumption: It's maximum output power consumption is 5A, although it is recommended to use within 4A. Please ensure that the peak current output current does not exceed 5A

enlightened High Efficiency: Its efficiency rate conversion is up to 96%, the efficiency is related to input, output voltage, current, and pressure difference.

 

What is a buck or step-down converter?

They are like a switched-mode power supply (SMPS) or a “switching power supply” containing at least a diode, a transistor and at least one energy storage element: a capacitor, inductor, or the two in combination. In other words, the buck converter is used to "step-down" an input voltage to some lower level, required by a load. 

For high efficiency, the module must be able to be turned on and off quickly and have low losses. The key feature that drives the buck is the tendency of an inductor to resist changes in current by either increasing or decreasing the energy stored in the inductor magnetic field. In a buck converter, the input voltage must always be higher than the output voltage.

Related products

* Prices do not include TAX. ** All prices updated to 18/07/24.