This dual white controller is a high-performance color temperature and brightness adjustable LED touching remote control, adopting the most advanced PWM control technology. To achieve the desired color effect, there are two groups of lighting adjustment, the system has 20 grades of brightness and 11 grades of color temperature.

It also has a  memory function which means the previous settings will be resumed once it is powered on again. Widely used in color temperature and brightness adjustable dual white LED strip lights, LED modules and other LED products. The user can re-programme freely as needed. One remote can control countless controllers, but one controller can only be controlled by four remotes (Max).

Installation Checklist:

• The remote control requires x2 3V AAA batteries (NOT INCLUDED).

• Check the battery installation and controller (totally discharge the power), when you programme after switching off and switching on.

• Check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise the controller will be damaged..

• Please do not connect wires when powered on. Please switch on only when it is in the right connection and there is  no short circuit.

• Do not use  the touching ring when installing the batteries, to improve its sensitivity, and use the remote (3 seconds later) after the installation.

• Please reinstall the batteries, if the touching ring is found low-sensitivity.

• Do not use the controller in the place with a widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.

Owing to the 2.4G high RF wireless remote control technology, it has the characteristics of low power consumption,  allowing you a remote distance between 65.6-98.4ft | 20-30m, and strong anti-interference ability, high speed telecommunications, and more.

The remote looks fashionable, with simple and practical functions of color temperature and brightness dimming, the capacitive touch screen design makes the remote easy to use . The modular design and easy screwed terminals enable the controller to match with all kinds of LED lights.

How does it work?

• Code Matching

For a new kit ( remote plus  controller), the remote can work only when it is programmed to the controller.

Please follow the below instructions:

Confirm correctly connect the power supply, LED controller and LED load.

Press key 1 once  times  within 3 seconds when powered on again, the light will blink 2 times when it is done.

• Code Clearing

The code can be cleared as needed.

The kit (remote and controller) will stay in the original state after code clearing,and it can work when code matching is done.

Please follow the below instructions:

Confirm correctly connect the power supply, LED controller and LED load.

Press key 1 five times within 3 seconds when powered on again, the light will blink 9 times when it is done.