This RF RGB Controller is used for controlling a variety of lighting fixtures whose source of light is LED. For instance, flexible light strips, wall washer lamps, glass curtain wall lights and so on. According to the customers’ needs, it can do gradual changes, fade in dimming, jumping change, flicker, quick flash and other varieties of static color lighting effects.

The most interesting highlight of this RGB controller is that it comes with two memory cards, if you long pressed for 3s you will be able to save in memory 1 or memory 2 a DIY mode set from the buttons FADE and FLASH , or the static state in which the controller is at that moment. If you long press the button MEMORY 1 for 10s you can delete a saved mode. This is a great way to set-up your indoor lighting to the next level, without needing to constantly program it for each occasion.

How does it work?

 Input: power input side, 1 is V-, 2 is V+

 Output: load output side, 4 is V+, 3 is R, 2 is B, 1 is G

 Pair button: power on and within 3s long press the button to pair the remote controller with controllers. The load light will flicker three times once the match code is done successfully. You can only match code one time. If you want to match it again, you need to turn it off and then power on again.

 Mode switch key: there are 5 built-in modes: three-color jump changing, six-color jump changing, three-color fade in and fade out, seven-color fade in and fade out, seven-color gradual changing.

 Flash + Colors + Flash: Press the flash button once, then the colors you wish to sequence and finally the flash button again, then the sequence of the previously pressed colors will begin. Example: FLASH + R + G + C + FLASH = Flashing between RED-GREEN-CYAN colors that repeats indefinitely. You can choose up to 7 colors.

 Fade + Colors + Fade: Press the fade button once, then the colors you wish to sequence and finally the fade button again, then the sequence of the previously pressed colors will begin. Keep in mind that the sequence of fading colors will always be from one color to the other, starting the first color strongly, and then fading away to a lighter color. Example: FADE + R + G + C + FADE = Fading between RED-GREEN-CYAN colors that repeats indefinitely. You can choose up to 7 colors.

 Speed increase /decrease key: up to 10 levels of adjustment.

 100% Key: This button has 2 functions, if pressed and released instantly, it increases the brightness to 100%. If  it's kept pressed for at least 2 seconds, it will gradually increase the brightness until it reaches 100%.

 75% Key: Sets the light level to 75% of the max.

 50% Key: Sets the light level to 50% of the max.

 25% Key: This button has 2 functions, if pressed and released instantly it brings the brightness to 25% of its scale. If it's kept pressed for at least 2 seconds, it will gradually decrease the brightness until the brightness reaches 0%.