| Power Comsuption | 3 W |
| Working Current | 700 mA |
| Color | Infrared |
| Wavelength (±5nm) | 850 nm |
| Radiant Flux | 500 mW |
| Beam Angle | 140 ° |
| Dimmable? | Yes |
| LED Type | Epistar - HighPower LED |
| Number of LEDs | 1 LEDs |
| Operating Temperature | -22 ~ 167 °F |
| Storage Temperature | -40 ~ 185 °F |
| Connection Type | Welding |
| Cover | Encapsulado de Silicona |
| Diameter | 0.25 in |
| Base Diameter | 0.78 in |
| Length | 0.61 in |
| Width | 0,32 in |
| Height | 0,2 in |
| Weight | 0,11 oz |
| Lifespan | 30000 h |
| Safety Standard | RoHS | ISO 9001 |
Infrared high power LEDs is one type of LED that has higher power, currently widely applied on light sources for surveillance cameras and license plate readers, sensors used in factory automation (FA), smoke detectors, and infrared range finders for digital cameras.
A high power LED, or high power light emitting diode, is designed in order to operate at several hundred mA and a power consumption of 1 W or more. Because high power LEDs create a large amount of heat, special heat dissipation technologies are used on them.
DEMASLED`s 3W infrared (850nm) 3-3.6V high power LED provides a radiant flux of 500mW and comes in the shape of a star with a dome attached to an insulated backing plate by two points of tin, which act as a pre-heatsink. They should be mounted on another heatsink surface to avoid high temperatures. We recommend using our Thermal Conductive Rubber to glue the LED to the Heat sink. To concentrate the light beam of these LEDs, lens adaptation is possible (30x 60 ° ovals, 8°, 15°, 30°, 60°).
Highlights:
Wide Applications: Infrared Light Emitting Diodes (LEDs) are widely used for light sources of remote controllers, photo couplers and infrared communications such as Infrared Data Associations (IrDA’s). Examples of the applications are light sources for surveillance cameras and license plate readers, sensors used in factory automation (FA), smoke detectors, and infrared range finders for digital cameras.
Function & Reliability: These power LED stars offer an extremely high light output in an energy efficient way. The power LED comes mounted on to special PCB star that acts to draw heat away from the LED, therefore extending its operational life. This makes them perfect for many lighting applications.
Easy Installment: It has 4 connectors: 2 positives and 2 negatives which are possible to connect through soldering with a tin point. Glue it with thermal paste onto another heatsink surface to avoid high temperatures. Available wiring in 3 ways: Individual, Parallel or Series Configuration.
Heat Dissipation: The high-power technology will require a heatsink and metal-core printed-circuit board (MCPCB) to ensure the junction temperature is not high enough to cause a loss in efficacy, a decrease in life hours, or color degradation.
Related products
