The different types of LED lights are highly popular in comparison to traditional incandescent lights, mainly because they can last about 25 times longer and with less energy use. One of the latest features in LEDs is COB´s or “Chip on Board” technology, another step to more efficient energy usage. Like SMDs, COB chips have multiple diodes on the same surface, so one of the key differences between LED COB light and SMD light is that COB LEDs have more diodes.

COB chips typically have 9 or more diodes, also, it only has 1 circuit and 2 contacts, regardless of the number of the diodes. This design is the reason for the panel or tube-like appearance of a COB LED light; on the other hand, an SMD light appears like a series of smaller lights, like illuminated dots. Some COB chips are also known to produce a large number of lumens (brightness) with less energy, a large viewing angle, and other related excellent characteristics that make COB widely used. 

COB technology offers increased levels of light dispersion, eliminating those dark then bright patches created by narrow beam fittings, additionally, COBs have greater reliability and a longer lifespan than the SMD LEDs, with 3M adhesive tape on the backside, high color efficiency, uniform illumination. A COB LED achieves higher brightness with a more uniform appearance than its predecessors.

Our COB LED strip is available in a roll of 16.4ft | 5m and with 2,640 COB LEDs, providing a uniform and high luminous flux.

Highlights:

 New Technology: The yellow coating in the middle of the COB Chip is just a phosphor coating, allowing complete control of color temperatures and CRI. This type of LED technology makes the chip density of our strip up to 528 chips per meter, meaning 2,640 COB chips per roll, this promises much more flexibility and better brightness over other LED technologies.

 Higher Brightness: Our cold white (6,000°K) COB strip offers 1,100lm per meter and total luminous flux of 5,000 lumens, as well as a CRI of >90Ra, makes it perfect for ceilings, walls, stairs, indoor lighting, and more!

 Low energy usage: With just 10W per meter or 50W per roll, it is ideal for replacing any 630W incandescent light fittings, either if it´s traditional to light tubes or bulbs, or if it´s a smaller lighting project, with just one meter of our 14W/m COB strip, you can replace any traditional 126W lighting.

 Multiple applications: Due to its greater flexibility and higher brightness, this COB strip is perfect for indoor lighting, home, and commercial lighting, ceilings, walls, clubs, bars, lounge, living rooms, conference rooms, task lighting, showrooms, displays, shelves, closets, wardrobes, or in outdoors after proper installations are made in order to protect the COB strip.

 Adhesive backing & flexibility: Featuring a 3M Peel-And-Stick self-adhesive tape and the flexibility of the strip allows you to install your LED strip on any given smooth and clean surface. Please refer to the manual or datasheet for the connection diagram, if you are unsure, it is recommended that the installation is done by a professional.

 Cuttable: The light strip is manufactured to be cut to any desired length up to 16.4ft without losing functionality. It can be cut into segments of 24-LEDs (every 1.78in | 4.54cm) at the marked sections and be assembled by simple soldering or you can use our connectors for easy installation.

 Ideal beam angle and lifespan: With its 120-degree beam angle, smooth and even light spread, it is ideal for home and business lighting decoration providing a linear or perimeter effect. It provides high brightness, with low power consumption, and with up to a 30,000 hour’s long life span.

Tips before buying:

 When comparing COB strip lighting between companies, if both competing strips are using the same chips, look at how many COBs are on the strip and look for lumen output (luminous flux, the higher it is, the brighter it will be)  to determine brightness. 

 Pay attention to how many COB chips there are per foot or meter. 

 When searching for bright COB strip lights, make sure you compare apples to apples, not all LED strips are made in the same way and with the same data specs.

 If you have doubts about the COB strips you need for your projects, please contact our FREE TECH SUPPORT TEAM. 

Note:

■ This product must ONLY be used with a DC 24V power supply. The voltage must be the same as the voltage required by the LED strip. If it is lower, the intensity of the strip will be lower than it should. If it is greater than required, it can burn the LED Strip.

■ You can use a power supply with a current and power consumption (watts) values ​​equal to or greater than the total consumption of the COB strip, but not with values ​​lower than the total consumption of the strip as it would damage the operation of the same.

■ If you want to use dimmers to regulate the light intensity or controllers to choose the hue of the color, it is necessary to use amplifiers. Please contact our FREE tech support team to provide you with the best possible assistance for your project.

Precaution:

■ DO NOT expose this Strip to sunlight because of UV damages.

■ DO NOT bend this LED Strip on a ratio under 15 mm / 0.59 in.

■ DO NOT bend it in a horizontal plane. 

■ Given that it can damage the LED Strip and NULLIFY the GUARANTEE.