| Battery Lifespan | 1.5 h |
| Battery | 3.7V 2400mAH Vdc |
| Input Voltage | 85-265 Vac |
| Output Power | 50 W |
| Driver | Isolated |
| Material | ABS |
| Casing Color | White |
| Connector Type | Plug Hembra | Plug Jack Macho |
| Installment | Surface |
| IP Protection Grade | IP33 |
| Use | Indoor / Outdoor |
| Length | 5,12 in |
| Width | 1.77 in |
| Height | 2.5 in |
| Weight | 5.29 oz |
Drivers are alternatives to power supplies for LED systems (or other applications). The operation of the drivers for LEDs is very simple, once the driver is connected to the power, the current at the output will remain constant, and the voltage will be automatically regulated according to the number of LEDs that are connected to it.
This Emergency Driver can detect any failure in the normal power supply and will proceed to use the energy stored in the battery, supplying voltage to LED luminaires, such as panels or downlights. The brightness of the LED luminaire is automatically adjusted to 30% of its nominal illumination, saving energy.
When power is restored, the inverter will switch to the emergency power supply in standby mode, recharging the batteries until the next failure.
Ideal for commercial or industrial spaces such as hospitals, hotels, buildings, companies, offices, homes, among others.
Highlights:
Multiple applications: Ideal for connecting High Power LEDs; This driver is used to connect 1 to 5 high-power 1W LEDs in series. Suitable for LED lighting products such as grating lights, panels, floodlights, street lighting, etc.
Safe & Reliable: Comprehensive short circuit, overload, and overvoltage protection. NO spark is produced when plugged in, it does NOT get too hot, NO need to worry about fire, explosion, shock, or damage that could reach children or yourself.
Recommendations:
Once the voltage and power consumption of the installation have been defined in Watts, choose the source taking into account that the power of the driver must exceed at least 20% of the total power consumed by the installation.
Place the driver within 9.8ft | 3m of the LED installation.
Place the driver in a ventilated space, without humidity.
In case of installing the driver outdoors or in a place with high humidity or condensation, the driver must be protected against humidity. The rest of the components of the installation (strips, connections) must also be anti-humidity.
Note:
■ Do not use the product for purposes other than its intended use.
■ The installation of the product must be carried out by qualified personnel.
■ Remove electrical power before installing.
