| Power Comsuption | 10 W |
| Working Current | 1050 mA |
| Input Voltage | 9 Vdc |
| Input Voltage | 11 Vdc |
| Color | Cool White |
| CCT | 6000-6500 ºK |
| CRI | >70 Ra |
| Luminous Flux | 1000 lm |
| Luminous Efficacy | 100 lm/W |
| Beam Angle | 120 ° |
| Dimmable? | Yes |
| LED Type | Epistar - HighPower LED |
| Number of LEDs | 9 LEDs |
| Operating Temperature | -22 ~ 167 °F |
| Storage Temperature | -40 ~ 185 °F |
| Connection Type | Welding |
| Cover | Encapasulado en Lente |
| Length | 0,79 in |
| Lifespan | 30000 h |
| Safety Standard | RoHS | ISO 9001 |
High power LEDs are a type of LED that has higher power and brightness. High power LEDs currently are widely applied on automobile lights, flashlights, lighting fixtures etc. Our high power LEDs offer the best solid-state light source enabling you to figure out the creative ideas about lightings.
DEMASLED`s 10W cool white (6,500°K) 9-11V high power LED and provides 1,000 lumens per LED. They should be mounted on another heatsink surface to avoid high temperatures. We recommend using our Thermal Conductive Rubber to glue the LED to the Heat sink.
Highlights:
COB technology: Chip on board (COB) LEDs are multiple LED chips (typically nine or more) bonded directly to a substrate by the manufacturer to form a single module. The chips can be mounted such that they take up less space and the highest potential of the LED chips can be obtained. Once multiple high power COB LEDs are installed, they appear more like a lighting panel, being multi-chip packaged, the light emitting area of a COB LED can contain more light sources in the same area that standard LEDs could occupy, resulting in a greatly increased lumen output per square inch.
Wide Applications: Street and road lighting, Contour lighting, stairway lighting, pendants, coves, displays and front panels, outdoor floodlights, landscape lighting, flashlights, reading lamps, security lighting, automotive applications, aquarium fish tanks, wall washers, and general decoration and entertainment light, for commercial, residential, and architectural.
Easy Installment: It has four connectors: two positives and two negatives, which are possible to connect through soldering with a tin point. Glue it with thermal paste onto another heatsink surface to avoid high temperatures. Available wiring in three ways: Individual, Parallel or Series Configuration.
Heat Dissipation: The high-power technology will require a heatsink and metal-core printed-circuit board (MCPCB) to ensure the junction temperature is not high enough to cause a loss in efficacy, a decrease in life hours, or color degradation.
